- Article no.: 1019633
- Manufacturer no.: 14373
- EAN: 4250197143738
- Weight: 0,78 kg
> 25 ready for shipment, delivery time 1-3 days
Prices incl. VAT plus shipping costs
HPE = High Performance
The HPE radiators are based on the NexXxoS series. But what is new? The HPE variant has additional cooling channels and a very high fin density. Due to the technical design, the cooling capacity increases significantly without restricting the water flow within the radiator. If the radiator is equipped with fans on both sides in push/pull operation, it is possible to achieve a significant temperature reduction compared to standard radiators.
X-Flow instead of U-Flow
The water flow in classic PC radiators is U-shaped. This means that the water inlet and outlet are on the same side on the radiator. This has certain advantages in the normal PC, however, it is difficult to set up a reasonable cooling loop like this in an extremely flat server. Due to the X-Flow technology, the input and output are located on the opposite sides. This makes it very easy to create a loop in the server rack. For example, you could go out from one side, directly into a CPU, then into one or more graphics cards and the pump, then back to the radiator on the other side.
Powerful cooling performance
To maximise the performance of the radiator, Alphacool reaches deep into its bag of tricks and uses pure copper for the cooling fins, cooling channels and pre-chambers. Due to the high thermal conductivity of 400 W/mK (in comparison: aluminium 236 W/mK). The high fin density of the radiator with a fin spacing of 15 FPI enables an optimal flow of air. All cooling fins are additionally equipped with small flaps. These are tiny wings that direct the airflow in the desired direction and ensure controlled air turbulence. This increases the cooling capacity and minimises the possible noise created by airflow.
Connection options & mounting
The NexXxoS HPE radiators each have three IN or OUT connections with G1/4" threads. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.
The NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.
Patented screw plugs
All NexXxoS HPE X-Flow radiators use Alphacool's patented stop fittings. Anyone who has mounted a radiator on the front or in the roof of a case is familiar with the fact that protruding stop fittings can stop the radiator from sitting flush. With the patented stop fittings, Alphacool offers an excellent solution. The stop fittings are completely recessed in the radiator and sit flush with its surface. This means that nothing stands in the way of a clean installation. Of course, the radiators also look much more elegant with the flat stop fittings.
|L x W x H||326 x 60 x 40 mm (+/- 3% tolerance in the range of the prechamber)|
|Material cooling fins, channels & prechamber||copper|
|Material outer housing||steel|
|Fins per Inch||15|
|Thread size fan mounting||M3|
|Fan size||40 mm|
|Fan slots||7 one-sided / 14 double-sided|
|Pressure tested||0,8 Bar|
|Max working temperature||60 °C|
Note on application
Please use only in conjunction with transparent water cooling fluids. The particles and additives in Pastel fluids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This may also void the manufacturer's warranty.
Our recommendation is to use Alphacool ready mixes.
|Radiator fins material:||Copper|
|Fan mounting thread:||M3|
|Pressure tested:||0,8 Bar|
|Number of fans:||7, 14|
|Fins per inch:||15|
|Thickness:||49 - 69mm|
|Dimensions (L x B x H):||326 x 60 x 40mm|