Your watercooling and modding distributor Your watercooling and modding distributor

Alphacool NexXxoS ST30 Full Copper 240mm Radiator V.2 - White Special Edition

  • 1021517
  • 18648
  • 4250197186483
  • 0,78 kg

> 50 ready for shipment, delivery time 1-3 days

£70.78 *

Prices incl. VAT plus shipping costs

Recommended accessories
Additional charge
Alphacool Eiszapfen 13/10mm compression fitting G1/4 - deep black sixpack
1x
Alphacool Eiszapfen 13/10mm compression fitting G1/4 - deep black sixpack
£28.12*
Alphacool Eisbaer LT (Solo) - black
1x
Alphacool Eisbaer LT (Solo) - black
£61.53*
Alphacool Eisbecher Aurora D5 Acetal/Glas - 150mm
1x
Alphacool Eisbecher Aurora D5 Acetal/Glas - 150mm
£80.95*
Alphacool Rise Aurora 120 mm fan (120x120x25mm)
1x
Alphacool Rise Aurora 120 mm fan (120x120x25mm)
£14.79*
Alphacool EPDM Tube 13/10 - Black 3m (9,84ft) Retailbox
1x
Alphacool EPDM Tube 13/10 - Black 3m (9,84ft) Retailbox
£14.52*
Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo with Backplate
1x
Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo with Backplate
£136.12*
The NexXxoS V.2 radiator is the further development of the already established NexXxoS V.1... more
Product Information

The NexXxoS V.2 radiator is the further development of the already established NexXxoS V.1 series and rightly takes its place among Alphacool's high-end full copper radiators. The fresh design in modern, noble white and the numerous technical details make the NexXxoS V.2 radiator the perfect partner for your own water cooling system.

Uncompromising in the choice of materials
Alphacool is the only manufacturer worldwide to use exclusively copper for all water-bearing parts in the radiator. The pre-chambers, cooling fins and cooling channels are all made of pure copper. The only exceptions are the threaded inserts (made of brass) and the outer casing of the radiator (made of sheet steel).

Sufficient cooling capacity
To maximise the performance of the radiator, Alphacool reaches deep into its bag of tricks and uses pure copper for the cooling fins, cooling channels and pre-chambers due to the high thermal conductivity of 400 W/mK (in comparison: aluminium 236 W/mK). The special fin density of the radiator with a fin spacing of 15 FPI give optimal airflow and performance. All cooling fins are additionally serrated. These act as tiny wings that direct the airflow in the desired direction and ensure controlled air turbulence. This increases the cooling capacity and minimises possible flow noise.

Patented screw plugs
All NexXxoS V.2 radiators use Alphacool's patented stop fittings. Anyone who has mounted a radiator on the front or in the roof of a case is familiar with the fact that protruding stop fittings can stop the radiator from sitting flush. With the patented stop fittings, Alphacool offers an excellent solution. The stop fittings are completely recessed in the radiator and sit flush with its surface. This means that nothing stands in the way of a clean installation. Of course, the radiators also look much more elegant with the flat stop fittings.

Plenty of connection options
All versions of the NexXxoS V.2 radiators have two options for IN and OUT on each side. On the opposite end is a fill or vent port, which can also be used to drain the water circuit.

Safety first
The NexXxoS V.2 radiator has a special protective plate that prevents fan or mounting screws from being screwed in too deeply. These plates are beneath the screw holes that are used to mount the fans to the radiator, or for mounting the radiator to the case. This protects the cooling fins and water channels underneath from damage.

Technical data
L x W x H 271.5 x 124 x 30 mm (+/- 3% tolerance in the range of the prechamber)
Material cooling fins, channels & prechamber copper
Material outer housing steel
Fins per Inch 15
Threads 5x G1/4“
Thread size fan mounting M3
Fan size 120 mm
Fan slots 2 one-sided / 4 double-sided
Pressure tested 1,5 bar
Max working temperature  60 °C
Weight 581 g
Colour White

 

Downloads:
Datasheet PDF | Manual PDF

Awards and documents
Technische Details und Videos... mehr
Technical details
Color: black
Manufacturer: Alphacool
Fan size: 120mm
Radiator fins material: Copper
Cooling channels: Copper
Fan mounting thread: M3
Case: Steel
Pressure tested: 1,5 Bar
Number of fans: 2
Fins per inch: 15
Thickness: 29 - 39mm
Connector: 5x G1/4"
Dimensions (L x B x H): 271,5 x 124 x 30mm
Videos
Questions & Answers more
Questions & Answers
No question has been asked yet.
Read, write and discuss reviews... more
Reviews
5 Stars:
(0)
4 Stars:
(0)
3 Stars:
(0)
2 Stars:
(0)
1 Stars:
(0)
Alphacool Eisrohr 13/10mm PETG HardTube 80cm - 4pcs Alphacool Eisrohr 13/10mm PETG HardTube 80cm -...
Content 320 cm (£5.05 * / 100 cm)
£16.15 *
Alphacool Ultra Pure Water 1000ml Alphacool Ultra Pure Water 1000ml
Content 1000 ml
£5.62 *