The new Phobya pumps: A revolution begins!
After the first products the manufacturer consortium Phobya now introduces a pump series which rattles the cages in the performance-pump sector. This product perfectly combines all the requirements from different watercooling users:
Quiet: At less than 22dB even most fans in the system emit more noise. For decoupling and therefore further noise reduction two kits are included with the pump: The first a map for quick and easy mounting on the case floor. The mat is self-adhesive on both sides and therefore reliably fixates the pump. The second possibility for pump installation are two brackets with which the pump can be fixated in the case.
A ceramic-based centrifugal bearing promises quiet operation and a long lifespan.
Compact: With the small outer dimensions (see technical specifications) the pump can be installed in almost any corner of the case, even in Midi- or Mini-towers. The compact dimensions of the pump also make connection to the cooling loop easy as the pump's position can easily be varied.
Powerful: Such a small and quiet pump so far always required compromises regarding the power. Not anymore! 4m of pressure head and 800l/h of flow are the kind of performance that will not be stopped even by cooling loops even with multiple waterblocks.
G1/4" connection: No adaptors, no annoyingly long connectors any more! Simply screw in the desired connector and you are set to go!
12V connector: The first advantage of a 12V connector is that it makes the connection with a 230V cable obsolete and that internal operation is made safe and easy. The other great feature of this pump is the connector: It is not a standard 4-Pin Molex connector, it is a 4-Pin PWM connector. This pump can therefore be operated at a fan connector on a Mainboard or a fan controller. This also allows a speed reduction of the pump: Only 8V are required for starting and operation of the pump which makes it additionally quiet and smooth in operation. The fan connector also offers the advantage of rpm monitoring with a compatible controller.
Casing material: Plastic
Outer dimensions: (L x W x H): 75 x 66 x 54mm
Connection thread size: G1/4"
Power connector: 4-Pin PWM
Nominal operating voltage: DC 12V
Starting voltage: DC 8V
Power consumption: 18W
Current draw: 1.8A
Max. pressure head: 4m
Flow rate: 800 l/h
Noise emission: below 25 db
Extent of delivery:
Decoupling bracket with 2x 4mm holes
This product has been reviewed for you:
Xtremesystems (Engl) (Userreview)
Hardmodding (pt) (User review)
|Max. Flow:||800l/h, Highflow (from 500 up to 1400l/h)|
|Max. Discharge head:||4m, Extreme (more than 4m)|
|Max. System temperature:||35°C|
|Power connector:||4Pin Molex|
|Water outlet:||G1/4" inner thread|
|Water inlet:||G1/4" inner thread|
|Approved fluids:||Water, Water/ glycol mixture|
|Dimensions:||75 x 54 x 66mm|
Click here to display this question (s).
Click here to show.
Die Pumpe ist für den Preis wirklich Top, etwas runterregeln dann ist Sie auch angenehm leise.