Your watercooling and modding distributor Your watercooling and modding distributor

EK Water Blocks EK-Quantum Vector Xtreme RTX 3080/3090 D-RGB - Nickel + Acetal

This product is currently not available.
  • 1022114
  • 3831109833032
  • 3831109833032
  • 1,61 kg

Delivery: 2021-12-13 - 2021-12-15

£154.75 *

Prices incl. VAT plus shipping costs

Recommended accessories
Additional charge
Alphacool Eiszapfen 13/10mm compression fitting G1/4 - deep black
2x
Alphacool Eiszapfen 13/10mm compression fitting G1/4 - deep black
£5.80*
Alphacool Eiszapfen 13/10mm compression fitting 90° rotatable G1/4 - deep black
2x
Alphacool Eiszapfen 13/10mm compression fitting 90° rotatable G1/4 - deep black
£7.98*
Alphacool Eiszapfen screw plug G1/4 - deep black
2x
Alphacool Eiszapfen screw plug G1/4 - deep black
£1.99*
Alphacool Eiszapfen PRO 13mm HardTube fitting G1/4 - deep black
2x
Alphacool Eiszapfen PRO 13mm HardTube fitting G1/4 - deep black
£6.71*
Alphacool Subzero Thermal grease 3,5g
1x
Alphacool Subzero Thermal grease 3,5g
£9.06* (£2,588.86 / 1000 g)
Apex Liquid ECO 1000ml clear
1x
Apex Liquid ECO 1000ml clear
£12.70*
EK Water Blocks EK-Quantum Vector Xtreme RTX 3080/3090 Backplate - Black
1x
EK Water Blocks EK-Quantum Vector Xtreme RTX 3080/3090 Backplate - Black
£44.42*
EK Water Blocks EK-Quantum Vector Xtreme RTX 3080/3090 Backplate - Nickel
1x
EK Water Blocks EK-Quantum Vector Xtreme RTX 3080/3090 Backplate - Nickel
£48.78*
This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for AORUS®... more
Product Information

This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for AORUS® Xtreme and Master RTX 3080 and 3090 graphics cards based on the latest NVIDIA® Ampere™ architecture.

An EK water block for Xtreme and Master RTX 3080 and 3090
EK-Quantum Vector Xtreme 3080/3090 D-RGB - Nickel + Acetal water block is compatible with Aorus Xtreme and Master RTX 3080 and RTX 3090 graphics cards. The Vector water block actively cools the GPU, VRAM (on the front), power stages, and chokes in the VRM (voltage regulation module).

These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them.

The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation.

The base of the block is CNC-machined out of nickel-plated high-grade copper, while its top is CNC-machined out of durable black POM Acetal. These 2nd generation Vector GPU water blocks also feature Acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure.

D-RGB lighting on EK-Quantum Vector Xtreme RTX 3080/3090 D-RGB water block
The aesthetic corner end-piece is housing the addressable D-RGB LEDs. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header.

Backplate for the EK-Quantum Vector Xtreme 3080/3090 water block
EK recommends the purchase of a retention backplate, especially for the 3090 models of graphics cards. The backplate improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, VRAM on the 3090 cards, and backside of the printed circuit board VRM section.

Technical Specification

  • Dimensions: (LxHxW) - 295x150.5x20.5mm 

Enclosed

  • EK-Quantum Vector Xtreme RTX 3080/3090 D-RGB series high-performance water block
  • Mounting mechanism with screw-in brass standoffs
  • Necessary mounting screws, nuts, and washers
  • 2x Nickel plated brass plug G1/4”
  • EK-Loop Multi Allen Key (6mm, 8mm, 9mm)
  • Thermal pads
  • Thermal grease EK-TIM Ectotherm (1g)
Awards and documents
Technische Details und Videos... mehr
Technical details
Cooler model: Complete cooler
Hardware manufacturer: NVIDIA
Cooling plate material: Copper plated
Top cover material: Acetal
Manufacturer: EK Water Blocks
Hardware model: RTX 3090, RTX 3070
Connector: 4x G1/4"
Dimensions: 295 x 150,5 x 20,5mm
Videos
Questions & Answers more
Questions & Answers
No question has been asked yet.
Read, write and discuss reviews... more
Reviews
5 Stars:
(0)
4 Stars:
(0)
3 Stars:
(0)
2 Stars:
(0)
1 Stars:
(0)