- Article no.: 1021004
- Manufacturer no.: ACALP00035A
- EAN: 4895213702829
- Weight: 0,338 kg
> 5 ready for shipment, delivery time 1-3 days
Improved Cooling Performance by New Production Process
The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.
Wide RPM Range
The Alpine 23 features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed.
Lower Power Consumption & Minimum Vibration
The new Alpine 23 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibration from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance.
High Quality Bearing
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
Extended Life Span
A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature.
Pre-applied MX-2 Thermal Paste
The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation.
Easy and Tool-free Installation
Thanks to the mounting clips, the installation is really easy. Alpine 23 is simply plugged onto the existing AMD retention modules and screwed tight.
Technical Data
Compatibility
- AMD Socket: AM4
- Ram Clearance: unlimited
- Warranty: 6 Years
Heatsink
- Outer Diameter: 93.4 mm
- Fin Material: Aluminum
- Number of Fins: 50 Y-shaped Fins
- Thermal Paste: MX-2 pre-applied
Fan
- Fan Diameter: 90 mm
- Fan Speed: 100 - 2000 rpm
- Fan Bearing: Fluid Dynamic Bearing
- Noise Level: 0.3 Sone
- Current: 0.06 A
- Connector: 4-Pin
Size & Weight
- Lenght: 98.6 mm
- Width: 121 mm
- Height: 65 mm
- Weight: 275.5