|Model of reservoir:||Tubing - reservoirs 50mm|
|Pump compatibility:||For flow pumps|
|Connector:||G1/4" inner thread|
|Number of connections:||3|
|Fillport:||G1/4" inner thread|
|LED hole:||Not available|
|Dimensions:||50 x 50 x 100mm|
|Material:||POM, Plexi, Brass copper plated|
The Alphacool Cape Coolplex reservoirs have been well-known and popular on the water cooling market for years!
But even such great products can sometimes use an update to fulfill even the most recent demands. Hence we at Alphacool have let the old series run out and now introduce the new series with POM end pieces as “LT” and now even with solid metal end pieces as the “Copper Edition”. Of course the tubes are made from high-grade Plexiglas which has proven itself with safe operation in many cooling systems for many years!
The changes made are subtle but very well thought through:
Besides the new materials and surface finishes the top piece of the reservoirs is now equipped with an additional thread, making them great for installation of a Fillport. Additionally the reservoir can now also be installed horizontally! The riser tube is now removable for applications where the top of the reservoir is used as an inlet.
A nice side effect: Now even more lighting modules can be installed for beautiful lighting effects.
To round off the new concept the screw plugs on all versions now have an elegant polished copper surface finish!
For maximum compatibility all threads are G1/4” in size. The proven transparent mounts are now also included again for almost invisible mounting. Make your PC a piece of art with the new Cape Coolplex reservoirs!
Material: POM, Plexi
Connection threads: G1/4"
Extent of delivery:
2x Mounting clamps
2 x G ¼" Screw plugs
Please note: For mounting additional screws are needed. We recommend ordering item No. 46023 with this reservoir.
Klicken Sie hier, um diese Frage(n) anzuzeigen.
Klicken Sie hier, um diese Bewertungen anzuzeigen.
Guter AGB, lässt sich gut befüllen. Bei einem System von 1,5-2L Volumen (sehr groß) reichen ca. 10 Füll-/Betriebszyklen aus, um den Kreislauf komplett zu befüllen. Die Mitgelieferten Stopfen sind per Hand oder Münze eher schwierig einzudrehen. Ich habe sie durch Verschlussstopfen in Schwarz austauschen müssen.
Einfacher schlichter Ausgleichbehälter. Das mitgelieferte Montagematerial ist so schön und vorbildlich.