Your watercooling and modding distributor Your watercooling and modding distributor

Koolance pump PMP-300

This product is currently not available.
  • 49088
  • PMP-300
  • 8295969044208
  • 0,309 kg

Delivery date unknown

Technische Details und Videos... mehr
Technical details
Approved fluids: Water, Water/ glycol mixture
Color: black
Dimensions: 120 x 22 x 17 mm
Manufacturer: Koolance
Material: Plastic
Max. Discharge head: 2,6m, Good (2 to 4m)
Max. Flow: 420l/h, Standard (smaller than 500l/h)
Max. System temperature: 60° C
Power connector: 3Pin Molex
Power input: 9,6W
Voltage: 12V DC
Water inlet: G1/4" inner thread
Water outlet: G1/4" inner thread
  The PMP-300 pump by Koolance is a compact pump with a low power consumption. The...more
Product Information


The PMP-300 pump by Koolance is a compact pump with a low power consumption.

The compact dimensions allow a whole new horizon of possibilities. Especially in smaller cases this pump is perfect. Thanks to the low power consumption a direct connection to the PSU is not necessary, the pump can also  be connected to a fan controller or Mainboard fan connector (Please always check the capabilities of the connectors!). The pump is equipped with G1/4" inlet and outlet connection threads which makes for maximum compatibility with virtually any system! The included mount and mounting screws with rubber washer allows safe and decoupled mounting of the pump.

Warning: Please note that the Koolance guarantee only remains valid if this product is operated with distilled water (pure water) or with water additives and / or finished mixtures of the following manufacturers: Koolance, Alphacool, Aquacomputer, Innovatek and Phobya. If other liquids are used the warranty may no longer be given.

Technical specifications:
Pump performance: 420 l/h (1.85 gal/min)
Pressure head: 2.6m (8.53ft)
Motor: Brushless DC
Dimensions pump (LxD): 73x50mm
Cable length: 29mm
Connection thread size: 1/4"
Dimensions mount (LxWxH): 120x22x17mm
Hole spacing: 66-111mm
Power consumption: Max. 9.6W
Nominal voltage: 6 to 12V DC
Maximum temperature: 60°C (140°F)
Connector: 3-Pin with rpm lead
Thread size: G1/4"
Weight: 283g

Extent of delivery:
1x Koolance pump PMP-300
Removable steel mount




Questions & Answers more
Questions & Answers
Es wurden bisher keine Fragen gestellt.

Haben Sie eine Frage?

Hinweis: Ihre Frage wird öffentlich einsehbar sein und kann - neben unserem Support - auch durch ein Mitglied unserer community beantwortet werden. Sie können Ihren öffentlich sichtbaren Namen und Ihre Email Benachrichtigungen in Ihrem Kundenkonto konfigurieren.
Read, write and discuss reviews...more
5 Sterne:
4 Sterne:
3 Sterne:
2 Sterne:
1 Sterne:
29 May 2014

Guter Durchfluss, relativ leise und solide Halterung und schneller Einbau. Einziges Manko: Die Gewinde an die die G1/4 Anschlüsse anzubringen sind, sind relativ kurz. Meine Steck-Anschlüsse musste ich kürzen dass sie passten.

temperature sensor single temperature sensor single
Content 50 (£2.16 * / 100 )
£1.08 *