Your watercooling and modding distributor Your watercooling and modding distributor

Aquacomputer pump module compact 600 standard, compatible with aqualis, G1/4

  • 52229
  • 41098
  • 4260073415439
  • 0,823 kg

2 available in stock

£59.13 *

Prices incl. VAT plus shipping costs

Technische Details und Videos... mehr
Technical details
Approved fluids: Water, Water/ glycol mixture
Color: black
Manufacturer: Aquacomputer
Voltage: 12V DC
Water inlet: G1/4" inner thread
Water outlet: G1/4" inner thread
Videos
The Aqua Computer pump module compact 600 is equipped with a long-lasting ceramic bearing made...more
Product Information
The Aqua Computer pump module compact 600 is equipped with a long-lasting ceramic bearing made by Aqua Computer and features whisper quiet operation as well as comprehensive controlling and monitoring options. The pump module is equipped with a USB pump controller that corresponds to the controller in the well known aquastream XT pump (Standard version) with the following key features:
- Automatic speed control
- Manual speed control
- aquabus interface
- Deaeration mode
- Rotation detection
- Configurable speed signal output

The pump module can either be used as a stand-alone pump or in combination with a compatible aqualis series reservoir. A mounting bracket made from stainless steel is included in delivery, an optional decoupling set can also be used (not included in delivery).

When used without an aqualis series reservoir, G1/4 inlet threads for fittings can be used on the top and side of the pump module, the pressure side is always connected to a G1/4 port on the side. The unused inlet thread can be sealed with a G1/4 sealing screw supplied with the pump module.

When used with an aqualis series reservoir (art. no. 45324 or 45325), pump module and reservoir form a virtually seamless unit. The sockets at the base of the reservoir slide into form-fitting receptables of the pump module and the gaskets on the sockets establish a watertight seal. When used with a reservoir, the thread on the side of the pump modules must be used to connect the water loop. Please note that for use with aqualis series reservoirs, another version of this pump module with integrated fill level sensor (art. no. 52230) is also available. The module sold here (art. no. 52229) does not feature a fill level sensor!

Scope of delivery:
Pump module with integrated pump and control unit (12 V DC)
Stainless steel bracket
Internal USB cable
aquabus/speed signal cable
Mounting material
Sealing screw G1/4

Compatible with:
aqualis base for pump adapters (art. no. 45325)
aqualis base for pump adapters with nano coating (art. no. 45324)

Please note:
Fittings and reservoir are not included in delivery!
Awards
Questions & Answers more
Questions & Answers
Frage von christophe l. vom 05. May 2016
Hallo können Sie mir die maximale Stromstärke zu Beginn dieser Pumpe senden danke
Antwort von Administrator vom 05. May 2016
Ich denke Sie meinen wieviel Watt die Pumpe beim starten zieht. Nach Rücksprache mit Aquacomputer geschätze 30W. Mehr kann ich leider dazu nichts sagen, ggf. die Frage präziser stellen.

Haben Sie eine Frage?

Hinweis: Ihre Frage wird öffentlich einsehbar sein und kann - neben unserem Support - auch durch ein Mitglied unserer community beantwortet werden. Sie können Ihren öffentlich sichtbaren Namen und Ihre Email Benachrichtigungen in Ihrem Kundenkonto konfigurieren.
Read, write and discuss reviews...more
Reviews
5 Sterne:
(0)
4 Sterne:
(0)
3 Sterne:
(0)
2 Sterne:
(0)
1 Sterne:
(0)
Phobya Simple Sleeve Kit 3mm (1/8") black 2m incl. Heatshrink 30cm Phobya Simple Sleeve Kit 3mm (1/8") black 2m...
Content 30 (£10.27 * / 100 )
£3.08 *