Your watercooling and modding distributor Your watercooling and modding distributor

Fractal Design Kelvin S24

This product is currently not available.
  • 1011408
  • 7350041082569
  • 2,471 kg

Delivery date unknown

Technische Details und Videos... mehr
Technical details
CPU Performance: Excellent
Hose dimensions: 11/8mm
Manufacturer: Fractal Design
Prefilled: Yes
Radiator Thickness: 30mm
Radiator size: 2x120mm
Socket: AMD 604/771/G34, AMD 939/AM2/AM2 /AM3/AM3 /FM1/FM2, Intel 1150/1155/1156, Intel 1366, Intel 2011, Intel 775
Simple to install, silent operation, powerful performance and easy expandability define the...more
Product Information

Simple to install, silent operation, powerful performance and easy expandability define the Kelvin Series. The silent high-performance ceramic pump is strong enough to support considerable expansion, should you decide to include GPU blocks and/or additional radiators in the same loop. 

The Kelvin Series water cooling systems are constructed from enthusiast class components. Both the CPU block and the radiator are made from pure copper, for maximum performance and an increased product life span with zero maintenance required. 

All modern CPU sockets are supported by the versatile, easy-to-use mounting kit. 

Fantastic cooling performance 
The strong pump and the full-copper construction places the Kelvin Series water cooling system ahead of the pack in cooling performance. 
Pump resistor included for the ability to optimize the system to a lower noise level, while maintaining impressive performance levels
Dynamic GP-12 PWM fans for quiet operation with significantly large airflow
Wide PWM speed range, 500-2000 RPM, providing accurate and better fan speed control with quieter operation

Expandable system. Just open it up to get the full benefits of custom water cooling, with the ability to add any components you want to the loop, such as a graphics card cooler. 
High pressure pump allows strong water flow rates even when an additional CPU or GPU water block or an additional radiator has been added to the loop. 
All parts have fully standard G 1/4" thread fittings for compatibility with the vast majority of enthusiast water cooling products. 
The tubes are fastened with two-part brass fittings, providing a secure seal while being easy to open and re-seal with a standard wrench. 
Easy refilling with dedicated fill port 

Made with enthusiast-grade components developed in cooperation with Alphacool 
Highly reliable ceramic bearing pump, with custom tuned maximum RPM for the optimal balance between performance and noise level 
made with a revolutionary copper/nylon radiators 
Full copper CPU Water block design featuring strategic jet plate improvements 

Avilable in many radiator configurations
Available with a triple fan radiator, a 30mm thick 360, providing a much larger area than nearly all other pre-filled water cooling units
Also available in the two most common formats: thin 240mm and thick 120mm

Long lifetime. The performance of most pre-filled water cooling systems degrade quite significantly over time, because of galvanic corrosion and water loss. 
Galvanic corrosion occurs over time when two metals with different galvanic potential (such as aluminum and copper) are in contact. It can be slowed with anti-corrosion additives in the water, but the best way to maintain performance over time is to use metals with similar galvanic potential. The Kelvin Series water cooling system is constructed with pure copper in both the radiator and the water block, along with brass fittings. 
To avoid the common issue of most pre-filled water cooling units (that tend to lose performance over time due to water loss in the tubes), Fractal Design equipped the Kelvin series with a fill dedicated port. 


General Specifications:

  • Block/pump assembly measurements: 69 x 69 x 40mm 
  • Tubing Measurements: 320mm long, 11mm outer and 8mm inner diameter 
  • Fitted with anti-kink coils for worry-free installation 
  • Kelvin T12 Radiator Measurements: 30 x 124 x 275mm 
  • Thread class for fill port and all tube fittings: G 1/4" 
  • Supported sockets: Intel: 775,1150,1155,1156,1366,2011, 2011-v3; AMD: AM2,AM2+,AM3,AM3+,FM1,FM2,FM2+ 
  • Fans included: 2 pcs 
  • Fractal Design Zero™ Thermal Paste ; 1 g syringe, sufficient for multiple mountings 

Fan Specification:

  • Fractal Design Dynamic GP-12 PWM fans 
  • 500 - 2000 RPM 
  • PWM control 
  • Max air flow: 78.6 CFM 
  • Max pressure: 2.30 mm H2O 
  • Acoustical noise: 32.2 dB(A) 
  • DC 12V, 0.20A 

Pump Specification:

  • Ceramic bearing 
  • 2400 RPM 
  • Voltage control 
  • Maximum water flow: 72 l/h 
  • Maximum pressure: 1.0 m H2O 
  • Acoustical noise: 25.0 dB(A) 
  • DC 12V, 0.27A 


Package contents

  • Fractal Design Kelvin S24 pre-assembled Water Cooling Unit 
  • 2 Fractal Design Dynamic GP-12 PWM controlled fans 
  • Intel 775,1150,1155,1156,1366 mounting hardware (including back plate) 
  • Intel 2011, 2011-v3 mounting hardware 
  • AMD AM2,AM2+,AM3,AM3+,FM1,FM2,FM2+ mounting hardware 
  • PWM splitter cable 
  • Low speed cable for pump (9V)
  • Fractal Design Zero™ Thermal Paste, 1g Syringe 
  • Long and short radiator mounting screws 
  • User manual
Questions & Answers more
Questions & Answers
Es wurden bisher keine Fragen gestellt.

Haben Sie eine Frage?

Hinweis: Ihre Frage wird öffentlich einsehbar sein und kann - neben unserem Support - auch durch ein Mitglied unserer community beantwortet werden. Sie können Ihren öffentlich sichtbaren Namen und Ihre Email Benachrichtigungen in Ihrem Kundenkonto konfigurieren.
Read, write and discuss reviews...more
5 Sterne:
4 Sterne:
3 Sterne:
2 Sterne:
1 Sterne: