|1. Side:||Barbed fittings 8mm|
|2. Side:||G1/4" outer thread|
|Compatibility:||Stiff tubing (PUR), Soft tubing (PVC, Silikon, Neoprene)|
Our trusted fittings are available in a whole new design!
Robust high-quality barbed fitting with cylindrical thread (G1/4"). The fitting is suitable for PVC, OU, PA, silicone and PE hoses with an inner diameter of 8mm. With integrated 1/4" Perbunan(r) O-Ring seal.
Material: Brass, black nickel coated
Hose size: 8mm inner diameter
Thread size: G1/4"
Extent of delivery:
Black nickel barbed fitting with O-ring seal
Note for watercooling beginners:
The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required