Note regarding the use of these templates:
With these templates it is possible to make suitable cut-outs in case tops or bottoms for Single-, Dual or Triple radiators in the 120mm format. With a suitable cut-out the radiator can be integrated elegantly into the case without disturbing the appearance of the system.

The bold lines show where to cut and/or drill, the thin, dashed lines show a rough estimate of how large the radiator will be. Please note that these lines are only roughly estimated as not every radiator has the same outer dimensions. Please refer to the description of the radiator to find out the exact outer dimensions.

The cut-out can be made exactly along the cutting lines. For perfect results it is also possible to cut along the filing lines and to file down the rest of the material. This usually results in cleaner cut-outs.

The templates are suitable for 1x120mm, 2x120mm, 3x120mm and 4x120mm radiators from Aquacomputer, Alphacool (NexXxos), HWLabs (Black Ice), Magicool, Koolance, Swiftech, Watercool, Thermochill (15mm) as well as XSPC.
These templates can not be used for the old Thermochill radiators.

Single:

To the Download  

Dual:

To the Download 

Triple: 

To the Download 

Quad:

To the Download    

Different radiator types use different screw types and sizes. Here our recommendations for the size of the holes:

3mm for: Alphacool (NexXxos), Aquacomputer, Magicool
3,5mm for Swiftech
4mm for: HWLabs (Black Ice), Koolance, Watercool, XSPC