With this water block we offer a perfectly tailored cooling solution for your EVGA SR-X Mainboard.

On this Mainboard both Northbridge as well as the PCI-E Gen3 Switch are cooled by a very large passive heatsink. The Mosfet water blocks cool the Mosfet banks of both CPUs. Should you also cool your CPUs with water, this water block is the perfect addition to your system to ensure proper cooling of the Mainboard's Mosfet modules.

With tthese water bloxks the Mosfet modules on the Mainboard can be cooled, offering the following advantages:

• Together with the Dualchip water block only six G1/4" fittings are required, even large fittings can be used. Thanks to a large spacing between the threads allows use of high-flow fittings
• In combination with the Dual-Chip water block all heat-critical components of the Mainboard are cooled in a matching design

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during  installation of this product and will not be liable.

Note regarding installations: The Mosfet water blocks must be installed with the original thermal pads! The Mosfet water blocks for the CPUs are also fixated with the included screws and washers from behind the Mainboard. Please make sure that these screws are also tightened evenly and only hand-tight!

Technical specifications:
Dimensions cooling plate: 83 x 20 mm
Overall size without fittings: 144 x 112 x 13 mm (L x W x H)
Weight: ~380g
Baseplate material: Pure copper 5mm
Middle plates: Pure copper 2x 5mm
Cover material: POM black 6mm
Connection thread size: 1/4´´

Extent of delivery:
1 x MIPS EVGA SR-X Mosfet POM
Mounting material